Aqua USB dac not being RECOGNIZED by PiCorePlayer.(diagnostics shown here)

Hi Everybody, PicorePlayer Ver7 will not recognize the USB Dac I have connected to it. I've tried all these output settings in Squeezelite,
but none of them make music, even though the file will be playing in S.Lite. can you suggest something? THANKS.
I have used and tried the following scripts:
hw:CARD=a384,DEV=0 front:CARD=a384,DEV=0 hw:CARD=b1,DEV=0 Plugw:CARD=b1,DEV=0 sysdefault:CARD=bi
sysdefault:CARD=a384 sysdefault:CARD=a384,DEV=0 ieca384:CARD=Device,DEV=0 plughw:CARD=a384,DEV=0


DIAGNOSTICS PAGE EXTRACT
49.482172] usb 1-1.2: Product: aqua USB Audio 384
[ 49.482179] usb 1-1.2: Manufacturer: aqua
[ 49.489046] usb 1-1.2: 1:3 : unsupported format bits 0x100000000
[ 49.495636] usbhid 1-1.2:1.3: can't add hid device: -71
[ 49.495658] usbhid: probe of 1-1.2:1.3 failed with error -71
[ 49.496210] usb 1-1.2: USB disconnect, device number 51
[ 49.841620] usb 1-1.2: new high-speed USB device number 52 using xhci_hcd
[ 49.972074] usb 1-1.2: New USB device found, idVendor=31c1, idProduct=0002, bcdDevice= 6.f2
[ 49.972082] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 49.972089] usb 1-1.2: Product: aqua USB Audio 384
[ 49.972095] usb 1-1.2: Manufacturer: aqua
[ 49.978935] usb 1-1.2: 1:3 : unsupported format bits 0x100000000
[ 49.985478] usbhid 1-1.2:1.3: can't add hid device: -71
[ 49.985501] usbhid: probe of 1-1.2:1.3 failed with error -71
[ 50.180262] usb 1-1.2: USB disconnect, device number 52
[ 50.481619] usb 1-1.2: new high-speed USB device number 53 using xhci_hcd
[ 50.582022] usb 1-1.2: Device not responding to setup address.
[ 50.801781] usb 1-1.2: Device not responding to setup address.
[ 51.021622] usb 1-1.2: device not accepting address 53, error -71
[ 51.561620] usb 1-1.2: new high-speed USB device number 54 using xhci_hcd
[ 51.662005] usb 1-1.2: Device not responding to setup address.
[ 51.881773] usb 1-1.2: Device not responding to setup address.
[ 52.101618] usb 1-1.2: device not accepting address 54, error -71
[ 52.101871] usb 1-1-port2: attempt power cycle
[ 52.981618] usb 1-1.2: new high-speed USB device number 55 using xhci_hcd
[ 52.981787] usb 1-1.2: Device not responding to setup address.
[ 53.201775] usb 1-1.2: Device not responding to setup address.
[ 53.421621] usb 1-1.2: device not accepting address 55, error -71
[ 54.331910] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 54.332146] usb 1-1-port2: unable to enumerate USB device