I'm having trouble with squeezelite on a pi2 running max2play (server is on another pi). I have a topping d10 dac attached and am getting annoying low level popping sounds which are obtrusive on tracks with quiet background (solo piano and choral for example). I do not get this problem attaching the topping to a windows laptop runnning squeezelite-x so assume the problem lies with the squeezelite settings.
sorry for the dumb quesion but what it the correct output device?
I've tried most of the d10 ones and they seem to still have the popping. Should I change the buffer settings? -a 80:4::
any ideas? Am I looking in the wrong place?
sorry for the dumb quesion but what it the correct output device?
Code:
#### SQUEEZELITE -l ####
Output devices:
null - Discard all samples (playback) or generate zero samples (capture)
jack - JACK Audio Connection Kit
pulse - PulseAudio Sound Server
equal
plugequal - Equalizer for plughw:0,0
default:CARD=Headphones - bcm2835 Headphones, bcm2835 Headphones - Default Audio Device
sysdefault:CARD=Headphones - bcm2835 Headphones, bcm2835 Headphones - Default Audio Device
dmix:CARD=Headphones,DEV=0 - bcm2835 Headphones, bcm2835 Headphones - Direct sample mixing device
dsnoop:CARD=Headphones,DEV=0 - bcm2835 Headphones, bcm2835 Headphones - Direct sample snooping device
hw:CARD=Headphones,DEV=0 - bcm2835 Headphones, bcm2835 Headphones - Direct hardware device without any conversions
plughw:CARD=Headphones,DEV=0 - bcm2835 Headphones, bcm2835 Headphones - Hardware device with all software conversions
usbstream:CARD=Headphones - bcm2835 Headphones - USB Stream Output
default:CARD=D10 - D10, USB Audio - Default Audio Device
sysdefault:CARD=D10 - D10, USB Audio - Default Audio Device
front:CARD=D10,DEV=0 - D10, USB Audio - Front speakers
surround21:CARD=D10,DEV=0 - D10, USB Audio - 2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=D10,DEV=0 - D10, USB Audio - 4.0 Surround output to Front and Rear speakers
surround41:CARD=D10,DEV=0 - D10, USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=D10,DEV=0 - D10, USB Audio - 5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=D10,DEV=0 - D10, USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=D10,DEV=0 - D10, USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=D10,DEV=0 - D10, USB Audio - IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=D10,DEV=0 - D10, USB Audio - Direct sample mixing device
dsnoop:CARD=D10,DEV=0 - D10, USB Audio - Direct sample snooping device
hw:CARD=D10,DEV=0 - D10, USB Audio - Direct hardware device without any conversions
plughw:CARD=D10,DEV=0 - D10, USB Audio - Hardware device with all software conversions
usbstream:CARD=D10 - D10 - USB Stream Outputany ideas? Am I looking in the wrong place?